Tank Cleaner 500ML
This is a strong cleaning fluid to degrease your tank. We recommend always using this product
as this ensures good adhesion of the sealant to the surface of the patrol tank. Especially if you have the kit
in a tank for a two-stroke engine, it is necessary to first use the tank cleaner.
"TANK CURE" products allow you to professionally overhaul the inside of your fuel tank.
"TANK CURE" is manufactured by POLY-SERVICE. This petrol-resistant Tank Sealant is widely used
in the Netherlands, Germany, England and Belgium. Users have built up more than 15 years of very satisfactory experience with this kit.
It has been successfully applied to steel, aluminum, polyester and carbon fiber tanks.
Treating the tank before applying Tank Sealant
To ensure good results you should always do some preparation to your tank. Before applying the sealant,
the tank must be absolutely dry, grease-free and virtually free of rust. "TANK CURE" offers you products that will help you with...
the preparation of the tank.
Tank cleaner "TANK CURE"
Rust remover "TANK CURE"
"TANK CURE" Epoxy Remover
These products form an ideal basis before applying our tank sealant. We briefly highlight each product:
Tank cleaner "TANK CURE"
This is a strong cleaning fluid to degrease your tank. We recommend always using this product because this is a...
ensures good adhesion of the sealant to the surface of the patrol tank. Especially if you apply the sealant in a tank for
For a two-stroke engine it is necessary to use the tank cleaner first.
Rust remover "TANK CURE"
Tanks with a rusted inside can be treated very well with this product. We recommend using the Rust Remover
to use if the inside of your tank is severely rusted.
"TANK CURE" Epoxy Remover
This product removes all old layers of paint and/or sealant. Only use this product if you want to apply a new sealant or if you
are planning to weld on your tank. You only need this product if you want to remove old layers of sealant or paint or if there is...
must be welded to a tank with sealant on the inside.
For a motorcycle tank you need 1/2 liter of Tank Cleaner and 1/2 liter of Rust Remover.
What can you achieve with our Tank Sealant?
heal rusted tanks
stop leakage through seams and holes
preventive treatment against leaking seams, holes and rust formation
shielding contamination in oil tanks (after sandblasting)
Application of the tank sealant:
To ensure good results you should always do some preparation to your tank. Before applying the sealant, the
tank must be absolutely dry, grease-free and virtually free of rust. It is highly recommended to use our TANK CURE Cleaner and
TANK CURE Rust Remover to be used according to our usage guidelines to ensure good results.
These products have been extensively tested in combination with our Tank Sealant.
"TANK CURE" tank kit is based on a 2-component epoxy resin. After joining the two components together a pair
stir well for minutes, empty the can in your gas tank and close the filler neck tightly.
Now slowly rotate the tank in all directions. Continue spinning for about 15 to 20 minutes.
The sealant must touch all surfaces several times to form a good layer. Now open the filler cap and turn the tank upside down
to drain as much sealant as possible.
You will find several products on the market to treat gasoline tanks. Whatever product you are going to use: it is very important
to apply enough sealant to completely cover the inside of your tank. Because during the sealing process you are not in the
tank, you should stay on the safe side. Experience shows that for a petrol tank of 15 to 20 liters you need approximately 450 grams.
"TANK CURE" supplies two standard packages of kit. A 450 gram package for motorcycle tanks up to 20 liters and a 600 gram package
for car tanks up to 60 liters.
